how to install the Android 4.4 KitKat on your Samsung Nexus S
Get the Android 4.4 KitKat Update on Samsung Nexus S via CyanFox Dark Themed ROM
how to install the Android 4.4 KitKat on your Samsung Nexus S.
WARNING!
Warranty may be void of your device if you follow the procedures given on this page.
You only are responsible for your device. We won’t be liable if any damage occurs to your device and/or its components.
CHECK DEVICE MODEL NO.
To make sure your device is eligible with
this, you must first confirm its model no. in ‘About device’ option
under Settings. Another way to confirm model no. is by looking for it on
the packaging box of your device. It must be GT-I9020!
Do not use the procedures discussed here on any other device of Samsung or any other company. You have been warned!
BEFORE YOU BEGIN..
You must do this pre-installation stuff before attempting to install
the ROM on your Samsung Nexus S in order to avoid any complications
later, and have a smooth and successful process.
GET THE LATEST CWM/TWRP RECOVERY
Make sure that you’ve latest version of the recovery of your choice installed on your device.
Older versions of both CWM and TWRP
recoveries are not working with Android 4.4 based ROMs, throwing
installation errors and WiFi bugs, therefore you need to use the latest
version of either recovery. We believe TWRP v2.6.3.0 and above, and CWM
v6.0.4.3 and above are working fine with Android 4.4 ROMs.
BACK UP YOUR DEVICE
Back up important data and stuff before
you start playing around here as there are chances you might lose your
apps and app-data (app settings, game progress, etc.), and in rare case,
files on the internal memory, too.
For help on Backup and Restore, check out our exclusive page on that linked right below.
CHARGE YOUR DEVICE
If your android device powers off due to lack of battery while the process is underway, it could damage the device.
So, make sure your device is adequately charged — at least 50% battery of the device.
EXAMPLE VIDEO
If you haven’t used a custom recovery, either CWM or TWRP, before, to
install a .zip file of a ROM on anything else, then we suggest you
first watch a video of that, given right below, to get familiar with the
process.
Just fyi, the video below shows installing a .zip file (of recovery) on Galaxy S3, but it doesn’t matter as the process remains exactly same. So, once you are finished with video, jump to downloads and step-by-step guide below.
Just fyi, the video below shows installing a .zip file (of recovery) on Galaxy S3, but it doesn’t matter as the process remains exactly same. So, once you are finished with video, jump to downloads and step-by-step guide below.
SAMSUNG NEXUS S ANDROID 4.4 KITKAT ROM
DOWNLOADS
Download the files given below and transfer them to a separate folder on your phone and remember the location.
GAPPS FILE
DOWNLOAD LINK | File name: CyanFox-Gapps-2013-12-15.zip (64 MB)
ROM FILE
DOWNLOAD LINK | File name: CyanFox-2.0.1-crespo.zip (201.6 MB)
For latest version of the ROM, check the original page →
Reminder: Before you proceed, make sure you’ve transferred the files you downloaded above to a separate folder on your Samsung Nexus S.
STEP-BY-STEP GUIDE
Reminder: Make sure
you’ve installed latest version of the recovery of your choice and have
backed up your device adequately (including important data stored on
internal memory) as mentioned in ‘Before you begin..‘ section above.
GUIDE FOR CWM RECOVERY USERS
- Boot into recovery mode. For this:
- Power off your device and wait for 5-10 seconds until the device is fully switched off.
- Press and hold Volume Up + Power buttons together and don’t release them until you boot into bootloader mode
- Once in bootloader mode, use Volume down key to navigate
to/highlight RECOVERY and select it by pressing the Power button. You’ll
boot into recovery mode.
└ In Recovery mode, use Volume buttons to navigate Up and Down between options and use Power button to select an option.
- Create a Nandroid Backup from recovery. It’s optional but very important to do, so that in case something goes wrong you can restore to current status easily. For making a Nandroid Backup, go to Backup And Restore » Backup.
- Perform a Factory Reset (This will delete all apps and their settings and game progress). For this:
- Select Wipe data/Factory reset, then select Yes on the next screen to confirm factory reset (screenshot)
- First Install the ROM file:
- Select Install zip » Choose zip from sdcard (or external sdcard, you know where your files are) » browse to the location where you saved the file and select the ROM file
- Now similarly flash the Gapps file.
└ Make sure to first flash the ROM file and then the Gapps file. - Reboot your device. For this, go back to the main menu of recovery and select reboot system now.
Note: In case your device gets bootloop (stuck at logo while rebooting), just do a factory reset (step 3) and you will be fine.
GUIDE FOR TWRP RECOVERY USERS
- Boot into recovery mode. For this:
- Power off your device and wait for 5-10 seconds until the device is fully switched off.
- Press and hold Volume Up + Power buttons together and don’t release them until you boot into bootloader mode
- Once in bootloader mode, use Volume down key to navigate
to/highlight RECOVERY and select it by pressing the Power button. You’ll
boot into recovery mode.
└ In Recovery mode, use Volume buttons to navigate Up and Down between options and use Power button to select an option.
- Create a Nandroid Backup from recovery. It’s optional but
very important to do, so that in case something goes wrong you can
restore to current status easily. For making a Nandroid Backup, go to Backup » and select all check boxes and swipe on the Swipe to confirm option at the bottom of the screen to confirm backup.
- Perform a Factory Reset (this will delete all apps and their settings and game progress). For this:
- Tap on Wipe » then at the bottom of the screen do a Swipe on the ‘Swipe to factory reset‘ option (screenshot)
- First Install the ROM file:
- Tap on Install » browse to the location where you saved the files and tap on the ROM file. Now at the bottom of the screen, do a swipe on the Swipe to confirm flash option to begin flashing.
- Now similarly flash the Gapps file.
└ Make sure to first flash the ROM file and then the Gapps file. - Reboot your device. Go back to the main menu of recovery and tap on Reboot » then, tap on System to reboot your phone.
That’s all. Your phone will now reboot and it will take some time as
it’ll be phone’s first boot after installing Android 4.4, be extremely
excited for this!
Note: In case your device gets bootloop (stuck at logo while rebooting), just do a factory reset (step 3) and you will be fine.
Note: In case your device gets bootloop (stuck at logo while rebooting), just do a factory reset (step 3) and you will be fine.
No comments:
Post a Comment